Show Emergency Alerts (Eas); Set/Change Pin; Reset Av Settings - Philips 51PP9200D/37 Manuel De L'utilisateur

Settings | Setup
Preferences 4 Menu preferences
OSD
Picture/sound prefere...
Features preferences Show emergency al...
Menu preferences Change PIN

Reset AV settings

Settings | Setup | Preferences
Preferences
OSD
Show emergency alerts
This menu allows you to setup or to select some menu related setting
Change PIN
preferences.
You can select the display of the volume bar and a reduced or an
extended on screen display of program and channel information.
Settings | Setup | Preferences
Menu preferences 3 Show emergency al...
Always
OSD
Skip low priority
Show emergency alerts
Skip medium/low pri...
Change PIN
You can select the display of the volume bar and a reduced or an
extended on screen display of program and channel information.
Tips:
Emergency Alert Signalling is not possible:
- when content browsing;
- with analogue video sources.
- You always have the possibility to remove the message from the
screen.
- The message display will overlap whatever menu element or other
message is on the screen.
Caution! If you have forgotten your PIN!
&
Select in the Menu preferences menu and
Change PIN
press the cursor right.
é
Press the cursor right to enter the overriding PIN code
0-7-1-1 .
"
Press the cursor again and enter a new personal 4-digit
PIN code. The previous code is erased and the new PIN-
code is stored.
Settings | Setup
Preferences 4 Reset AV settings
Picture/sound prefere...
Features preferences Start now
Menu preferences
Reset AV settings
This resets the picture and sound settings to their predefined factory
values, but maintains the channel installation settings.
12
3
3 OSD 2
Normal
Minimum
3
Menu preferences
On Screen display
& Select OSD.
é Press the cursor right button to select Normal or Minimum.
Normal to activate the continuous display of the channel number (for max.
10 minutes) and extended display of TV channel and program information
on screen. E.g. information on the main or auxiliary program, input signal
quality of connected accessory devices, the display format, sound mode,
availability of Closed Caption service, the audio language, the rating,
sleeptimer setup.
Minimum to activate the display of reduced channel information.
Note: When Closed Captions is turned on, continuous display of the channel
number and clock is not possible.

Show emergency alerts (EAS)

This allows you to select the alert priority level of the information
disseminated by the cable operator. The standard SCTE18 defines an
Emergency Alert signalling method for use by cable TV systems to signal
emergencies to digital devices such as digital set-top boxes, digital TVs and
digital VCRs.
The Emergency alert signalling scheme defined in the standard allows a
cable operator to disseminate emergency alert information related to state
and local-level emergencies and warnings in a cost-effective and efficient way,
while minimizing disruption of programming.
An Emergency alert message will have one of the following priorities:
Low, Medium, High or Maximum.
The Emergency alert message with priority High or Maximum will always
be presented. Low or Medium will be present or ignored depending on
the selected setting.
Caution! When the TV clock is undefined (See section on Clock), the Emergency
Alerts will be ignored.
The Emergency Alert message display will contain following information:
- The Emergency Alert text
- The start time + date
- The end time + date.
& Select Show Emergency Alerts in the Menu preferences menu.
é Press the cursor right button and select one of the Emergency alerts
options:
- Always, when you always want the Emergency alert messages to be
displayed when available;
- Skip low priority, when you want the messages with low level to be
ignored;
- Skip low/medium priority, when you only want the messages with high
priority to be displayed.

Set/Change PIN

& Select Set or Change PIN with the cursor down button.
é If no PIN-code exists, the menu item is set to Set PIN. Follow the
instructions on screen.
If a PIN-code has previously been entered, the menu item is set to Change
PIN. Follow the instructions on screen.
All number combinations from 0000 to 9999 are valid numbers.
" The Menu preferences menu reappears with a message confirming that
the PIN has been created.
Reset AV settings
This function allows you to reset most of the picture and sound settings to
their predefined factory states.
& Select Reset AV settings with the cursor down button.
é Press the cursor right button.
" Press OK button to erase settings and reset them to their default values. -
-