Battery Replacement - Pro-Point 8819864 Manuel D'utilisateur

8819864
3. Remove the inner lens (#11) by sliding it out of the cartridge
(#7). Install the new inner cover lens after the protective
film is removed.
4. Remove the external lens (#3) by pulling the lens from
cradle's front. Remove the protective film from the new
cover lens and carefully press it into the cradle.
5. Insert the cradle back into the helmet and secure with the
cradle lock.

BATTERY REPLACEMENT

1. Replace the battery by removing the battery holder (#8)
on the cartridge's bottom corner.
2. Remove the old battery and replace with a new CR2450
lithium battery. Check that the battery's polarity is correct.
3. Reinstall the cover holder into the ADF.
CLEANING
NOTICE! Do not use alcohol, gasoline or diluents to clean the
filter cartridge. Do not put place the filter cartridge into water
as this will damage the filter.
Clean the lens, helmet shell and headband with a soft cotton cloth
and mild soap. Replace the headband when required.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or
by-laws for electronic devices, batteries, oil or other toxic
liquids.
12
Solar Auto-Darkening Welding Helmet
With Blue Lens Technology
For technical questions call 1-800-665-8685
V1.0