PRO-POINT 8819864 Manuel D'utilisateur page 11

V1.0
When a general setting is completed, the ADF settings will be
stored for 5 minutes
BATTERY ICON
The battery icon (G) indicates the power charge available.
Change the batteries when down to a single bar (see
Maintenance – Battery Replacement).
WARNING! Failure to change a low battery may result in
exposure to UV/IR radiation and blinding arc light. A low
battery may compromise the delay timing and shade
accuracy.
MAINTENANCE
1. Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components.
3. When servicing, use only identical replacement parts. Only
use accessories intended for use with this tool. Replace
damaged parts immediately.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
CHANGE EXTERNAL AND
INTERNAL LENS
The external and internal lenses will wear out and need
replacement after a period of use due to exposure to the heat,
fumes and particulate matter generated during welding.
1. Remove the cradle lock (#6) and pull the cradle from the
welding helmet.
2. Remove the filter cartridge (#7) from the ADF cradle (#4).
Visit www.princessauto.com for more information
Solar Auto-Darkening Welding Helmet
With Blue Lens Technology
8819864
11