Leuze electronic DCR 85 Manuel D'utilisation Original page 29

Code
MSI Plessey
MSI Plessey
MSI Plessey
MSI Plessey
Tab. 8.4: Decoding extras – 1D codes
Parameter Settings
Settings of register 24F are bitwise OR-connected.
Example: Command (24F)8435 enables the following options
• Send Code 39 Start and Stop Delimiter
• Force output of all decoding data to upper case
• Remove UPC-A check digit
• Remove UPC-A number system digit
• Convert EAN-8 to EAN-13
• Remove GS1 DataBar "()" characters
Send Code 39 start and stop delimiters
enable
disable
Remove Codabar start and stop delimiters
enable
disable
Force all decoding data to upper case
enable
disable
Force all decoding data to lower case
enable
disable
Leuze electronic
Parameter Settings
The settings of register 4F are bitwise OR-connected
• Example: Command (4F)25 enables MSI Plessey decoding with Two Bytes Mo-
dulo 11/10 checksum and UK Plessey decoding
• Command (4F)00 disables all MSI Plessey decoding and the checksum settings
Decoding
enable
disable
Checksum Method
Checksum checking disabled
One Byte Modulo 10
Two Bytes Modulo 11/10
Two Bytes Modulo 10
One Byte Modulo 10 and strip from output (4F)09
Two Bytes Modulo 11/10 and strip from
output
Two Bytes Modulo 10 and strip from out-
put
UK Plessey (original) Decoding
enable
disable
Command-Data
(4F)01
(4F)00
(4F)00
(4F)02
(4F)04
(4F)06
(4F)0A
(4F)0C
(4F)20
(4F)00
Command-Data
(24F)0001
(24F)0000
(24F)0002
(24F)0000
(24F)0004
(24F)0000
(24F)0008
(24F)0000
DCR 85
Instructions en ligne
29