Unpacking And Checking Contents; Unpacking The Miter Saw; Loose Parts; Checking Contents In Package - Bosch Gcm18V-07S Consignes D'utilisation/De Sécurité

Unpacking the Miter Saw

To avoid severe pinching,
never lift or move this saw
by gripping any component of the mechanism
support system.
When removing this tool from packaging materi-
als, reach down to the two side carry-handle lo-
cations and slowly lift until it clears the package.
Fig. 4

Loose Parts

Torx Wrench (39)
2 Workpiece Clamps
(40)
16099221PK GCM18V-07S OSI 20220506.indd 16

Unpacking and Checking Contents

Checking Contents in Package

Open the top of the package and look for the
included loose parts (Fig. 4).
Some small parts must be attached to the tool
before it is ready for use.
Check off each part.
Operating/Safety
Instructions
Dust Bag (32)
-16-
5/6/22 11:27 AM