Dismounting The Compressor; Disposing Of The Compressor; Dismounting The Oil Separator And Oil Cooler - Biber OSKA9563 Instructions De Service

9.2 Dismounting the compressor

WARNING
The compressor is under pressure!
Serious injuries are possible.
Depressurize the compressor!
Wear safety goggles!
In the case of repair work requiring dismounting or in
the event of decommissioning:
Close the shut-off valves on the compressor. Extract
the refrigerant. Do not deflate the refrigerant, but dis-
pose of it properly!
Open screwed joints or flanges on the compressor
valves. Remove the compressor using hoisting equip-
ment.

9.3 Disposing of the compressor

Drain the oil from the compressor. Dispose of waste oil
properly!
Have the compressor repaired or dispose of it properly.

9.4 Dismounting the oil separator and oil cooler

WARNING
Oil separator and oil cooler are under pressure!
Serious injuries are possible.
Depressurize oil separator and oil cooler!
Wear safety goggles!
Drain oil when performing repair work or decommis-
sioning the oil separator and oil cooler.
If possible, block refrigerant and oil lines in front of and
behind the oil separator and oil cooler.
Prepare a pan: Drain oil, collect oil and dispose of it
properly.
In case of damage, the oil separator or oil cooler must
be separated from the refrigerator system and re-
placed. For this, extract the refrigerant and drain the
coolant.
Dispose of contaminated substances properly!
SB-520-1 15