Product Presentation; Package Contents; Installation Instructions - Bwt Rn-305 Notice D'installation Et De Maintenance

1.

Product presentation

The mechanical float level controller automatically stabilises the water level in your pool.
2.

Package contents

Telescopic lid frame
Telescopic lid frame lid
Level controller body
Brass fitting equal male/female 3/8"
Level controller float RN305
Mechanical level controller valve RN305
Gasket Ø30 x Ø16 x 1.5 SBR 70Sh
Disposal of packaging: Items such as paper, cardboard, plastic or any other recyclable item must be taken to
a suitable sorting center
3.

Installation instructions

‐ Install the level controller separately from the filtration system.
‐ It is strongly recommended that you make a reservation at the water inlet to the level controller, so
that you can later access the nut and gasket on the outside of the level controller body.
‐ Check that the sealing height will be compatible with that of the skimmers and the desired water
level.
‐ Install a shut-off valve on the water supply line.
‐ During installation, check that the floa can move freely.
‐ Use 8 to 12 wraps of PTFE tape (such as Teflon® tape) on the connections to ensure that they are
leaktight.
Adjust the float to the desired height and lock it on the rod by tightening the adjustment screw.
‐
‐ Once the height of the float has been set, check that the water supply cuts off at the desired water
level (re-adjust the float height if necessary).
CONSTRUCTION & RENOVATION
Description Quantity
1
1
1
1
1
1
1
6 2025/04 - Indice de révision : B - Code : 25040