Criteria For The Installation Location; Installing The Appliance; Preparing The Appliance For First Use; Connecting The Appliance To The Drinking Water Connection - Gaggenau Rvb477790 Manuel D'utilisation

Table des Matières
en-us Installation and connection
4.2 Criteria for the installation location
WARNING
If the appliance is in a space that is too small, a leak in the
refrigeration circuit may result in a flammable mixture of
gas and air.
Only install the appliance in a space with a volume of at
least 35 ft
3
(1 m
3
) per 0.3 oz (8 g) refrigerant. The
amount of refrigerant is indicated on the rating label.
→ "Appliance", Fig.
1
The weight of the appliance from factory may be up to
485 lbs (220 kg) depending on the model.
The subfloor must be sufficiently stable to bear the weight
of the appliance.
4.3 Installing the appliance
Install the appliance in accordance with the enclosed
installation instructions.
4.4 Preparing the appliance for first use
Remove the information material.
1.
Remove the protective film and transit bolts, e.g.
2.
remove the adhesive strips and cardboard.
Clean the appliance for the first time. →  Page 23
3.
4.5 Connecting the appliance to the drinking
water connection
Requirements
A shut-off valve must be installed on the water
¡
connection and be freely accessible following
installation of the appliance.
Ensure that the water coming from the water connection
¡
is potable.
The water hose has a sealing ring.
¡
Draw mains water from the domestic drinking water
1.
connection until the water is no longer cloudy and
containers no deposits.
If the mains water is still cloudy or contains deposits,
install an external water filter system.
Install the water hose according to the enclosed
2.
installation instructions on the appliance.
4.6 Connecting the appliance to the
electricity supply
Insert the appliance plug of the power cord into the
1.
appliance.
Insert the power plug of the appliance's power cord in a
2.
socket outlet with grounding nearby.
The connection data of the appliance can be found on
the rating plate. → "Appliance", Fig.
Check the power plug is inserted properly.
3.
The appliance is now ready to use.
a
8
/
, Page 10
16
/
, Page 10
16
1
Table des Matières
loading

Ce manuel est également adapté pour:

400 serie

Table des Matières