Vortice Air Door H AD900 M Notice D'emploi Et D'entretien page 11

ENGLISH
• install the appliance at least 2.3 m from the floor. (fig.
6); If the access area is larger than the appliance, we
recommend installing two or more units in parallel; in
this case, leave a gap of 20-40 mm between one unit
and the other.
6 6
• do not install the appliance in places where it could
come into contact with water, vapours, explosive
gases or corrosive substances (fig.7);
7 7
Mounting
Remove the mounting plate by loosening the screws
fixed to the back of the central body (fig.8).
8 8
Placa de montaje
Tornillo de fijación
NOTE Before installing the product if you want to
operate it with door opening sensors, use the
appropriate terminals (4,5) as shown in the
connection diagram further on .
20 ~ 40 mm
Mounting on concrete walls
Fix the bolts in the right position (establish this
position using the mounting plate and pour the cement
into the bolt holes) (fig.9).
9 9
Cemento
13-15
mm
When the cement has hardened, position the
mounting plate using the washer and nut as indicated
in the fig.10.
10 10
Rondana
Rondana
elastica
Nuez
Placa de
montaje
Apply the central body to the uppermost part of the
mounting plate and hook it on as indicated in the
fig.11.
11 11
70 mm
11