How To Use Bpv6222B; Start Cooking - Brandt BPV6210B Manuel D'instruction

3.3 How to use BPV6222B

3.3.1 Start cooking

After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, the ceramic hob
now in standby mode.
Touch the ON/OFF control. ll the indicators
for 8 seconds. After 8 seconds or after touching any key,
all the power indicators show "
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Touch the heating zone selection control
Select a power level by touching the "-" or "+" control.
After setting the power level, confirm the power by touching
the heating zone selection control
seconds for automatic confirmation.
• By holding down either of "-" or "+" control, the value
will adjust up or down.
 You can directly access to the power level "9" by pressing
the " -" control key at first time.
• If you don't choose a heat setting within 1 minute, the
ceramic hob will automatically switch off. You will need to start
again at step 1.
• You can modify the heat setting at any time during
cooking.
A flash
".
again or wait for 5
EN-11
" "