Publicité
SAFETY INSTRUCTIONS
Pull the plug from the socket:
- Whenever you leave the machine;
- Before clearing a blockage;
- Before checking, cleaning or working on the appliance; after
striking a foreign object. Inspect the appliance for damage and
make repairs as necessary; if the appliance starts to vibrate
abnormally (check immediately).
Keep all nuts, bolts, and screws tight to be sure the appliance
is in safe working condition.
Check the grass box frequently for wear or deterioration.
Replace worn or damaged parts for safety.
On machines with multi blade, take care as rotating one blade
can cause other blades to rotate.
Be careful during adjustment of the machine to prevent
entrapment of the fingers between moving blades and fixed
parts of the machine.
For rotary mowers, ensure that only replacement cutting
systems of the right type are used.
Replace worn or damaged parts for safety. Use only genuine
replacement parts and accessories.
When servicing the blades be aware that, even though the
power source is switched off, the blades can still be moved.
The extension cable, plug and socket must be watertight and
intended for outdoor use.
Always allow the machine to cool down before storing
The machine should be supplied via a residual current device
(RCD) with a tripping current of not more than 30 mA.
Caution: An inadequate extension cable can be dangerous and
can cause accidents. Please contact a qualified electrician for
advice if in any doubt.
241
241
FR
ES
PT
IT
EL
PL
UA
RO
EN
Publicité
