Lighting - Atag WS9111MRL Notice D'utilisation

Masquer les pouces Voir aussi pour WS9111MRL:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE
Removing the long life charcoal filter

Lighting

Switch off the electricity! Remove the plug from the socket or switch off
i
the electricity at the mains.
• Pull the panel (that holds the grease filter(s) of the CMV) downwards.
• Push in the stud to release the recirculation grease filter, and tilt the
h
grease filter down toward you.
• Behind the grease filter you can find the charcoal filter. Remove the
filter holder frame by turning the knobs ( * ) 90° that affix the chimney
to the cooker hood.
Important:
• Saturation of the activated charcoal will eventually occur after more
or less prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• You can wash and reuse the carbon filter. Replace the mattress
every 3 years and when the cloth is damaged.
• You can rinse out the mattress max. five times.
Attention!
This hood is fitted with LED light! These have to be replaced by a
authorized technician. Do not attempt to replace LED light by yourself.
g
g
EN 13

Publicité

Table des Matières
loading

Table des Matières