Pairing The Wireless Remote Control Via The Wireless; Appliance Handover - Stiebel Eltron FFB 4 EU Utilisation Et Installation

INSTALLATIoN

Appliance handover

9.2 Pairing the wireless remote control via the
wireless module
With some appliances, the pairing process has to be initiated di-
rectly on the wireless module.
WARNING Electrocution
Only qualified contractors are permitted to open the ap-
pliance and work on the open appliance.
f Open the appliance. For details on opening and closing the f
instantaneous water heater, see the operating and installa-
tion instructions of the instantaneous water heater.
1 Button for pairing and unpairing
2 Yellow LED indicator illuminates when wireless remote con-
trol is activated
www.stiebel-eltron.com
f To initiate the pairing process, press the button on the wire- f
less module. The yellow LED starts to flash.
f Press buttons "1" and "2" simultaneously on the wireless f
remote control for 3 seconds. A flashing "L" indicates that
pairing is in progress.
An LED flashing several times in quick succession indicates that
the pairing process has completed successfully.
Unpairing all wireless remote controls when the appliance is
open
f To unpair all wireless remote controls, press the button for f
5 seconds. The yellow LED lights up briefly at the end.
10. Appliance handover
2
f Explain the functions of the appliance to the user. Show the f
user how to operate the appliance.
1
f Make the user aware of potential dangers, especially the risk f
of scalding.
f Hand over these instructions. f
FFB 4 EU | FFB 4 Set EU | FFB 4 AP | FFB 4 Set AP | 23