Teac LP-P1000 Mode D'emploi page 53

The "hour" value blinks.
o If no action is taken for 10 seconds, timer setting
will end automatically.
3 Press the TIME (j/k) buttons to set
the TIMER ON hour and press the TIMER
button.
Display example
o After setting the hour, the minutes blink.
4 Press the TIME (j/k) buttons to set
the TIMER ON minute and press the
TIMER button.
Display example
After making the TIMER ON setting, "OFF TIME"
appears and the hour value blinks.
c
3
5 Repeat steps and
OFF time.
Display example
Continued on the next page
4
to set the TIMER
53