Install the appliance in a dry, well-ventilated room. The installation location
should neither be exposed to direct sunlight nor near a heat source, e.g. a cooker,
radiator, etc.
To ensure adequate ventilation for the appliance, allow a minimum of 10 cm of
airspace on each side of the cabinet.
For uneven surfaces, front feet can be aligned.
This appliance is designed to operate in ambient temperature between 16°C and
38°C. If these temperatures are exceeded, i.e. colder or warmer, the appliance
will not operate correctly. If the ambient temperatures are exceeded for long
periods, the temperature in the freezer compartment will rise above -18°C and
food spoilage may occur.
USING YOUR REFRIGERATOR FREEZER
Before placing food in the appliance
•
Remove all packaging.
•
Allow the appliance to run empty for 2 – 3 hours so the compartment can
cool to the appropriate temperature.
•
Clean the inside of the appliance with warm water and a little liquid
detergent to remove manufacturing and transportation dust.
Hints for fresh food refrigeration
•
Good temperature setting that ensures preservation of fresh food is a
temperature less than or equal to +4°C.
•
Higher temperature setting inside the appliance may lead to shorter shelf
life of food.
•
Cover the food with packaging to preserve its freshness and aroma.
•
Always use closed containers for liquids and for food, to avoid flavours or
odours in the compartment.
8
INSTALLATION
AMBIENT TEMPERATUE