Troubleshooting Guide - Frigelux Rdp138Be Manuel D'instructions

3. Remove the center hinge from the right-side appliance.
Remove the screw hole covers from the left side of the
appliance.
4. Remove the refrigerator door from the appliance. Move
the hinge plug from the top left to the top right side of
the door.
5. Remove the door stop from the lower right side of the
refrigerator door. Install the door stop on the lower left
side of the refrigerator door.
6. Remove the lower hinge from the bottom right side of the
appliance. Remove both adjustable feet. Remove the
lower hinge pin from the hinge, flip the hinge over and
reinstall the hinge pin on the other side. Install the lower
hinge on the bottom left side of the appliance. Install both
adjustable feet.
7. Install the refrigerator door. Install the center hinge on
the left side of the appliance. Ensure that the center
hinge spacer is installed between the center hinge and
the appliance to allow the doors full range of motion.
Install the screw hole covers on the right side of the
appliance.
8. Install the freezer door. Install the upper hinge and the
hinge cover on the top left side of the appliance. Install
the screw hole cover on the top right side of the
appliance.
Note: Ensure the rubber gaskets are making a good seal with the appliance all the way
around the doors before tightening the hinge screws.

7. TROUBLESHOOTING GUIDE

You can solve many common refrigerator problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem before calling for
service.
36