Safety Instructions; Possible Misuse - Josef Kihlberg JK1219HT Mode D'emploi

Josef Kihlberg JK1219HT
3
Original
KIHLBERG
4

SAFETY INSTRUCTIONS

Inform yourself!
Before using the tool,
read the operating
instructions carefully.
Protect yourself!
When operating the tool,
wear eye, face, hand pro-
tection (cut-proof gloves)
and safety shoes.
Warning:
Strap will snap forward!
When cutting the strap,
hold the upper portion
and stand safely away
from the strap.
Caution:
The lower strap will snap
forward.
Warning:
Strap could break!
Do not stand in line with
the strap while it is ten-
sioned. The strap could
break!
Caution:
Danger of squeezing!
Do not put your fingers
into the tension wheel/die
area.
Caution:
Only strap packed
goods!
Do not put hands or other
parts of the body bet-
ween the strap and the
package during the strap-
ping process. Before
strapping ensure that no
other persons are in the
danger area.
Original Josef Kihlberg
spare parts must be
used exclusively!
Not using original spare
parts will dissolve the
warranty and the liability.
Use for the intended purpose
The tool is intended for strapping flat packages, pallet
loads etc.
This tool was designed and manufactured for safe
handling during the strapping operation.
The tool processes steel straps only.

Possible misuse

The use of plastic straps is not possible.
Servicing
The following maintenance work must be carried out
at regular intervals, varying with working conditions
and workload:
– clean the tool regularly (see chapter 6.1)
– check the condition of the tool at regular intervals
for defects or worn parts. Never use a tool that has
defective or worn parts.
05.20