Environmental Protection; Standard Spare Parts; Circuit Diagram; Manufacturer's Declaration Of Ce Conformity - Viking GB 460 Manuel D'utilisation

3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
VIKING recommends that you have
maintenance operations and repairs
performed exclusively by a VIKING
specialist dealer.
VIKING specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Corrosive and other resultant damage
caused by incorrect storage.
– Damage and resultant damage due to
the use of spare parts which are not
original VIKING parts.
– damage due to maintenance and repair
operations not performed in the
workshops of authorised specialist
dealers.

15. Environmental protection

Shredding material should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
68
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life.
15.1 Disposal
Render the engine unusable prior to
disposal.
In particular, remove the ignition lead,
empty the fuel tank and drain the engine
oil.
Risk of injury from the blades.
Always store an old garden shredder in a
safe place prior to scrapping. Make sure
that the machine and the blades are kept
out of the reach of children.

16. Standard spare parts

Soft material blade disc assembly:
6012 700 5110
Hard material blade disc assembly:
6012 700 5100
Long wing blade:
6012 702 0310
Short wing blade:
6012 702 0300
Blade (x6):
6008 702 0121
Blade (x1):
6012 702 0100
Counter-blade:
6012 702 0500

17. Circuit diagram

1 Engine
2 Safety switch
BR brown
BL blue
BK black
18. Manufacturer's
declaration of CE conformity
We,
VIKING GmbH
Hans Peter Stihl-Strasse 5
A-6336 Langkampfen/Kufstein
declare under our sole responsibility that
the machine
Shredding machine for plant trimmings
with petrol engine (GB)
manufacturer's VIKING
brand:
type: GB 460.1
GB 460.1 C
serial number 6012
conforms to the following EC directives:
2000/14/EC, 2014/30/EU, 2006/42/EC,
97/68/EC
The product has been developed in
conformance with the following standards:
EN 13683
Applicable conformity assessment
procedure:
Appendix V (2000/14/EC)
0478 216 9905 D - EN
32