Publicité
locking button clicks into place (9). To release
the accessories simply hold the button down
and separate the components (9). Before
using the accessories, make sure that they are
firmly in place.
2.2 To connect the small brush, the steam
concentrator, and the brush accessories to
the flexible hose or the extension hoses, they
must first be attached to the steam lance,
so that the two arrows located on the two
components line up (11)-(12). Then, connect
the accessory adapter turning it until it is
locked to accessory (13).
3.
STEAM ADJUSTMENT
You can optimise the steam flow by means
of the steam adjustment knob (8). You can
increase the steam flow by turning the control
in an anti-clockwise direction. Turning it in a
clockwise direction reduces the steam flow.
Here are some suggestions for the choice of
steam flow level:
• Maximum level: for encrusted dirt, stains,
sanitising, grease.
• Medium level: for carpets, rugs, glass, tiles
etc.
• Minimum level: for vaporising plants and
cleaning
delicate
wallpaper, parquet, laminate, etc.
4. CLEANING FLOORS
Before using the appliance on delicate
surfaces, ensure that the part in contact
with the surface is free from foreign bodies
that could cause scratches.
4.1
Make sure that chapter 1 has been
completed and connect the accessories as
indicated in chapter 2.
4.2 Connect the extension tubes to the steam
hose and the floor brush to the extension
tubes.
4.3 Attach the supplied cloth to the floor
brush, locking it in place with the special lever
hooks (10).
4.4 Adjust the intensity of the steam by
turning the adjustment knob (8); for this
type of surface we recommend Medium level
steam.
4.5 Deactivate the steam lock (4)-(5) and
continue with steam delivery, pressing the
steam trigger on the handle of the steam hose.
4.6 Clean the floors by moving the brush.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to
cool.
fabrics,
upholstery,
WARNING: Do not use the appliance
without the cloth.
WARNING: For additional safety, test steam
delivery prior to use on a hidden part, leave
the steamed part to dry to ensure that no
changes in colour or deformation have
occurred.
5.
CLEANING RUGS
WARNING: Before cleaning leather or fabrics
with steam, consult the manufacturer's
instructions and always carry out a test on a
hidden part or on a sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
5.1
Make sure that chapter 1 has been
completed and connect the accessories as
indicated in chapter 2.
5.2 Connect the extension tubes to the steam
hose and the floor brush to the extension
tubes.
5.3 Adjust the intensity of the steam by
turning the adjustment knob (8); for this
type of surface we recommend Medium level
steam.
5.4 Deactivate the steam lock (4)-(5) and
continue with steam delivery, pressing the
steam trigger on the handle of the steam hose.
5.5 Pass the brush without cloth over the
surface to bring dirt to the surface.
5.6 Attach the supplied cloth to the floor
brush (10).
5.7 Go back over the surface to collect the
dirt.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to
cool.
6. CLEANING CARPETS
WARNING: Before cleaning leather or fabrics
with steam, consult the manufacturer's
instructions and always carry out a test on a
hidden part or on a sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
6.1
Make sure that chapter 1 has been
completed and connect the accessories as
indicated in chapter 2.
6.2 Connect the extension tubes to the steam
hose and the floor brush to the extension tubes.
| 15 |
Publicité
