Publicité
CORRECT USE OF THE PRODUCT
This
appliance
is
domestic
use
as
accordance
with
instructions contained in this manual. Please
read these instructions carefully and keep
them. If this manual is lost, it can be consulted
and/or
downloaded
www.polti.com.
POLTI S.p.A. reserves the right to make the
aesthetic, technical and construction changes
it deems necessary, without prior notice.
Before leaving our factory all our products are
rigorously tested. This is the reason why your
Polti Vaporetto may contain some residual
water in the boiler.
Correct use of the product is only as detailed
in this instruction manual. Any other use may
damage the appliance and invalidate the
warranty.
WHICH WATER TO USE IN THE
BOILER
This appliance has been designed to function
with medium-hardness tap water between
8°f and 20°f. If the tap water is very hard,
do not just use demineralised water but a
mix composed of 50% tap water and 50%
demineralised water which is widely available
to purchase.
Warning: check the hardness of the water at
the technical office at your local council or
the local water supplier.
If you only use tap water, you can reduce the
formation of limescale by using the special
Kalstop (PAEU0094) anti-limescale product,
distributed by Polti, and available for sale at
all major domestic-appliance stores or online
at www.polti.com.
Do
not
use
distilled
demineralised water, rain water or water
containing additives (e.g. starch, perfumes),
scented water or water produced by other
domestic appliances, by water softeners and
filter jugs.
Do not add chemical, natural, detergent, or
limescale removing substances, etc.
1.
PREPARATION FOR USE
1.1
Remove
the
packaging, checking that the product is intact
and that all the parts are included.
1.2
Unscrew the safety cap (1) and fill the
boiler with 1.6 l of water (if completely empty),
making sure it does not overflow, using the
special funnel (2). Carefully screw the safety
intended
for
internal
a
steam
cleaner,
the
descriptions
from
the
website
water,
undiluted
appliance
from
cap back on, checking that it is completely
closed.
1.3
Open the door of the one-piece socket
in
and insert the moulded plug until a click is
and
heard (3). Make sure that it is firmly connected
before proceeding any further. To release the
sheath, simply press the release keys and at
the same time remove the moulded plug.
The steam gun has a safety switch that
prevents the accidental starting of the steam
delivery by children or people unfamiliar with
how the appliance works (4)-(5).
1.4
For the Polti Vaporetto Smart_Airplus
model only, the steam gun has a tank to be
used exclusively with FrescoVapor, the natural
deodorant that, besides leaving a pleasant
fragrance, also captures bad smells. Please
refer to the instructions given in section 16 for
how to use Frescovapor.
1.5
Connect the cable plug to an earthed
power supply of the correct voltage (6).
Completely unwind the power cable before
plugging it into the mains and before use, and
always use the appliance with the power cable
completely unwound.
1.6
Press the ON/OFF switch (7). The power
indicator light will come on.
1.7
Wait for the pressure indicator lamp to
light up (about 8 minutes). Polti Vaporetto is
now ready for use.
WARNING: If steam is escaping from the
safety cap, switch the appliance off and
unplug it from the mains. Wait for at least
two hours for the appliance to cool before
unscrewing the cap and screwing it back
on.
WARNING: Never leave the filling bottle
or the funnel resting on the mouth of the
boiler, with the product connected to the
power supply, since this could cause burns.
WARNING: When first operating steam,
there may be some drops of water mixed
with
the
steam
imbalances. Direct the first jet of steam
onto a rag.
2.
CONNECTION OF
the
ACCESSORIES
Some accessories are contained in the
accessory holder (15).
2.1
To connect the extension tubes to the
grip, the large brush and the lance joint, simply
join them to one another until the accessory
| 14 |
due
to
temperature
Publicité
