Publicité
2
Hold the product tightly and make sure that the
saw blade does not touch the workpiece.
3
Set the power switch to "I" and let the product get
to its maximum speed.
4
Do the cut.
5
To stop the product, set the power switch "0".
3.6 To use the product to scrap
● Do not use force when the product is operated. Too
much pressure can cause nicks and marks on the
surface and overload the product.
1
Hold the product tightly and make sure that the
scraper does not touch the workpiece.
2
Set the power switch to "I" and let the product get
to its maximum speed.
3
Turn the scraper into an applicable level and move
it over the surface.
4
To stop the product, set the power switch "0".
4
Storage
● If the product is not going to be used for a long period
of time, remove the battery, keep the product in a
clean and dry area, where children and pets do not
have access to it.
5
Maintenance
Warning! Stop the product, let the moving parts
come to a complete stop and remove the battery before
you do maintenance on the product.
Warning! Only approved personnel can repair the
product.
5.1
To clean the product
Warning! Do not
soak the product in water and
make sure that no water gets into the product when you
clean it. There is a risk of electric shock.
Caution! Do not use solvents, corrosive, or abra-
sive detergents to clean the product.
● Clean the product regularly with a damp cloth.
● Keep the ventilation openings free from debris. If
necessary, clean them with compressed air.
EN
SV
NO
PL
DE
FI
FR
NL
9
Publicité
