Publicité
Table of contents
1
Introduction
1.1
The product ....................................................................5
1.2 Symbols ...........................................................................5
1.3 Product overview ........................................................5
2
Safety
2.1
Safety definitions .........................................................5
2.2 General power tool safety warnings..................6
2.3 Work area safety ..........................................................6
2.4 Electrical safety ............................................................6
2.5 Personal safety .............................................................6
2.6 Power tool use and care ..........................................6
2.7 Battery tool use and care ......................................7
2.8 Service ..............................................................................7
2.9 Vibration and noise reduction ..............................7
2.10 Safety instructions for operation .........................7
2.11 Residual risks ................................................................7
3
Operation
3.1
To install a battery to the product ......................7
3.2 To install or replace an accessory to the
product .......................................................................7
3.3 To install or replace sandpaper to the
product .......................................................................8
3.4 To use the product to sand.....................................8
3.5 To use the product to saw ......................................8
3.6 To use the product to scrap ...................................9
4
Storage
5
Maintenance
5.1
To clean the product ..................................................9
6
Troubleshooting
7
Discard
8
Technical data
1
Introduction
1.1
The product
5
The product is a multi-tool with adjustable speed. A saw
blade, scraper, sanding pad and 3 sandpapers (G80, G100
and G120) are included. The product is a part of the Meec
Tools Multiseries 18 V. Battery and battery charger are not
included.
5
1.2
Symbols
1.3
Product overview
7
Figure 1
1.
Accessory lock
2.
Power switch
3.
Battery port
4.
Speed control
5.
Ventilation openings
6.
Multifunctional head
7.
Saw blade
8.
Scraper
9
9.
Sanding pad
9
10. Sandpaper (G80, G100 and G120)
2
Safety
10
2.1
Safety definitions
10
Warning! If you do not obey these instructions,
there is a risk of death or injury.
10
Caution! If you do not obey these instructions,
there is a risk of damage to the product, other materials
or the adjacent area.
Note! Information that is necessary in a given situation.
Read the operating instructions carefully
and make sure that you understand the
instructions before you use the product.
Save the instructions for future reference.
This product complies with applicable EU
directives and regulations.
Recycle as electrical waste.
EN
SV
NO
PL
DE
FI
FR
NL
5
Publicité
