Publicité
EN
•
Clean the machine with a dry cloth. Do not use
slovents.
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can
cause damage to the plastic, and make the plastic
unserviceable.
Use only approved replacement parts.
6
TECHNICAL DATA
Voltage
Strokes per minute
Cutting angle
Orbital motion
Blade changing
Weight without battery
Battery model
Charger model
Measured sound pressure
level
Measured sound power
level
Vibration
The recommended ambient temperature range:
Item
Appliance storage temper-
ature range
Appliance operation tem-
perature range
Battery charging tempera-
ture range
Charger operation temper-
ature range
Battery storage tempera-
ture range
Battery discharging tem-
perature range
WARNING
CAUTION
24 V
-1
0-3500 min
0-45°
4 settings
Tool-Free
2.2 kg
G24B2/G24B4 and other
BAG series
2913907 and other CAG
series
88.5dB(A), K
= 5 dB(A)
pA
99.5dB(A), K
= 5 dB(A)
wA
2
5.2 m/s
, K = 1.5 m/s
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
English
7
WARRANTY
(The full warranty terms and conditions can be found on
Greenworks website )
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage)
from the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways than described
in the owner's manual might be ineligible for warranty
coverage. Normal wear and tear are not covered under
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
8
EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
Greenworks Tools Europe GmbH
Address:
Brunnenweg 17, 64331 Weiterstadt,
Germany
Name and address of the person authorised to compile
the technical file:
Name:
André Douqué
Address:
Brunnenweg 17, 64331 Weiterstadt,
2
Germany
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construction:
•
is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
•
is in conformity with the provisions of the following
other EC-Directives:
•
2011/65/EU & (EU)2015/863
•
2014/30/EU
Furthermore, we declare that the following parts,
clauses of harmonised standards have been used:
•
EN 62841-1; EN 62841-2-11; EN 55014-1; EN
55014-2; IEC 62321-3-1; IEC 62321-4; IEC
62321-5; IEC 62321-6; IEC 62321-7-1; IEC
62321-7-2; IEC 62321-8
6
Jig saw
JSD401
See product rating label
See product rating label
Publicité
