Installation 2: On/Off Element - Fenix V24 WIFI Guide D'utilisation

View the program profile for the other days by using
the (<) and (>) button;
Preview of the
program of the
current day
"Modify" - by pressing "Modify" button, you will have
the possibility to change the program day by day with
15-minutes steps with the possibility to choose
between three temperature values.
Current step in
the program
Movement along
the time axis (<)
(>)
Change current step with
Reduced/Comfort/Booster
temperature
When copying the current program day to other days
the following menu appears
The reference day in the example is "Tuesday", the
days selected are underlined with a blue frame. Click
on Valid button to copy the program on all selected
days you want the program.
"Select program" – the option to reuse the program of
another zone.
Use the (<) and (>) buttons to select the reference
zone you want to copy.
Select the program of another zone with (<) and (>),
then press the Valid button: program is automatically
renamed with the same name as the current zone. The
program created in this way can be subsequently
altered without changing the previous program.
- Reduced temperature
"Temperature" - change the setpoints used for the
- Comfort temperature
- Booster temperature
program, Booster / Comfort / Reduced setpoints
Day to modify
Set the required temperature values with the help of (+)
or (-). Confirm or cancel the change by pressing the
relevant button in the bottom part of the display.
3.2.1.2
Each zone can have its own name. The name is 20
Copy this day
character long maximum. Please refer to 2.1.6 section
to other days
for details.
3.2.1.3
Sets the wattage of the heating in a given zone
(Master+Slaves).
This value is used in the Statistics section.
Use (<) or (>) to select the digit and (-) or (+) to change
the value. Value is automatically saved when exiting
this menu
3.2.2
Receiver V25 or V26 paired directly with the central
unit.
It is similar to Installation 1, but Modes and program
parts are different.
9
Rename
Power

Installation 2: ON/OFF Element

.