Off Mode; Information Function; Technical Characteristics - Fenix V24 WIFI Guide D'utilisation

Zone number and name
Operating
mode
Change zone
Settings
Same as heating
Mode/Rename/Power
Mode – operating mode
3.2.2.1
To change the working mode, click directly on the
desired mode icon.
The current operating mode is in colour
Mode selection:
3.3

OFF mode,

Switch off a zone.
ON mode,
In this mode, the output of the receiver will always be
activated.
Timer Mode,
The timer mode enables a receiver to be switched on
for a selected period. Set with the help of (+) or (-) from
10 minutes to 5 hours, in 10 minutes steps.
Automatic mode,
Regulation of temperature according to a selected
program.
Use Setting button to have access to
View/modify/Select Program
Program edition for ON/OFF zones (Settings ->
Modify)
Current hour
Zone status
zone, 3 submenus:
OFF
Settings
menu
The controls on the V25 receiver enables it to be set
directly (On/Off, Timer 2 hours) and it takes
precedence over the instructions of the central unit.
3.4

Information Function

When pressing the information symbol, a more detailed
message about the status of the heating system is
displayed.
Heating system and regulation are OK.
Informative message.
- the heating system was switched off (high
tariff, network distribution failure)
- pilot wire signal (intended for the French
market)
- Floor limitation indication when the V23
receiver is used with a floor sensor
Error message:
- error in communication with the thermostat
- error in communication with the receiver
- error/damage to the sensor of the receiver,
thermostat
4

Technical Characteristics

Shipping and storage
temperature:
Electrical Protection
Electrical insulation
Temperature precision
Range of temperature
settings
Comfort, Reduced
Vacation (Non-freezing)
Power Supply
Radio Frequency
Software version
Compatible units
CE Directives
Your product has been
designed in conformity
with the European
Directives.
10
ON
Copy this day
to other days
0°C - 40°C
-10°C to +50°C
IP30
Class II
0.1°C
5°C to 37°C in 0.5°C
steps
7.0°C (adjustable)
230VAC +/- 10% 50Hz
868 MHz, <10mW.
Shown during init./Reset:
V xxx
V23 flush receiver
V25 socket receiver
V26 wall receiver
2001/95/EC
2014/35/EU
2014/53/EU
2014/30/EU
2011/65/EU