Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The control unit waits for a receiver in the "RF ini"
mode
Confirmation of a successful connection is shown on
the display
2.1.6
Now you can enter the name of the zone
which has just been connected
Key "Aa1" is used to switch to the different keyboards
(letters, uppercase, numbers, and special caracters)
Key "<<<<" is the back space button
Once name is correct, press the Validation button
Now, you will be offered the option of pairing another
zone. To configure other zones, repeat steps 2.1.3 to
2.1.6
To finish the pairing and return to the main screen,
press the arrow in the bottom left corner (back)
repeatedly
3
The appearance of the main screen
and options
Main
settings
menu
Press the "Settings" button to enter the main settings
menu
3.1.1
It is used to display the approximate consumption (in
kWh) of the individual zones. The wattages of the
heating systems in the individual zones need to be set
in order to use this function correctly.
The statistics available are
Use the (<)(>) buttons to see the different zones.
Statistics can be resetted using the
confirmation is requested to validate the suppression.
3.1.2
Press the "Vacation Settings" in the main settings
menu.
Three cases:
Lock
screen
function
To set the Vacation, there are three steps:
Zone
menu
Information
screen
4
3.1
Main settings menu
Statistics
-
Current day
-
The day before (Day -1)
-
Current week
-
The week before (Week -1)
-
Current month
-
The month before (Month -1)
Vacation Settings
- Vacation mode has already started: user has the
possibility to STOP it
- Vacation mode has been set but current date is
before the "Start date", user can change Modify or
Cancel the settings
- Currently no settings for Vacation mode, "Settings"
is displayed
- "Set Start date": when Vacation period must start
- "Set Return date": when Vacation period must end
- "Mode": mode to apply to all Heating Zones during
Vacation period
button; a
Publicité
Chapitres
Table des Matières
