Zone Menu; Installation 1 Heating Element - Fenix V24 WIFI Guide D'utilisation

If a valid file is on the SD card when pressing OK, the
update process starts. If the file is not valid the
message "Abort: SD file not OK", if it is the case then
check the file on the SD card and retry process. If the
same message appears then the file must be corrupted
and you need to download the file again.
Update Process can last 2 minutes; during this period
the V24 WIFI will restart two times before displaying
main menu again.
2) Factory Settings
Use this function to reset the unit to factory settings; all
individual settings will be erased from the V24 WIFI
central unit (program, zones...)
A confirmation is requested to reset the product.
Make sure that you have all information
needed to set the parameters of the control unit
and the individual zones again.
3.2

Zone menu

The menu is used to view individual zones and their
settings depending on the type of installation
(combination of thermostat/receiver elements).
3.2.1

Installation 1 Heating Element

Combination of a V23 (V25/V26) receiver with a V22
thermostat.
Operating
mode
Temperature
Heating
indicator
Change zone
By pressing the "Operating mode" icon, you will
have direct access to the settings of the mode.
Zone number and name
Settings
8
Settings
Settings of the heating mode and parameters of a
zone.
Mode – heating mode
3.2.1.1
The current operating mode is in color. To change the
working mode, click directly on the desired mode icon.
Heating modes:
Standby mode,
- switches off the heating in a zone.
Manual mode
- maintains the manually set temperature.
The (+) or (-) buttons are used to change the required
temperature; the change can also be made on the V22
thermostat in the given zone.
Non-freezing mode
Setting the non-freezing mode for a zone.
The set temperature can be changed using the (+) or (-
) buttons.
Automatic mode,
Regulation of temperature according to a selected
program.
By pressing the button, you will go to the following
screen.
"View current program" – preview the program of the
current day