"APP" sat expert
navigate in "configuration menu"
from the Volume screen
n.b.:
1. in sat mode, press the Plan key and select the satellite to be pointed, for example hbir
13.
2. Press the sPect key, navigate in "sPan" and select "Full".
eXAMPle 1:
the satellite you have pointed is not correct.
the lower part of the display shows the
following information:
eute 16 > G0 West
(move the satellite dish west).
sat to
be found
*n.B.:
• For more information or clarifications regarding the "aPP"s, contact your local
supplier or call +39.030.9198.1
_____________________________________________
(opt.)
eXAMPle 3:
the correct satellite has been pointed.
the lower part of the display shows the
following information: eBir9 < G0 eAst
(move the satellite dish east).
navigate in "sat", then in "sat eXPert"
and select "on"
eXAMPle 2:
satellite found.
the lower part of the display shows the
following information:
HBir13 founD!
(the satellite that has been pointed is correct)
sat
detected
21