Rover Instruments HD TAB 7 Manuel D'utilisation page 16

t v: lte interference Autotest
Press the "barscan" key twice to go to the lte interFerence
autotest function.
the lower part of the display shows the following information:
the lower part of the display shows the following information:
(the instrument suggests attenuating the interfering lte signals by
n.b.:
you can reach lte autotest directly from the sPecial Functions.
fonCtions CoMPleMentAires
Press the home key and navigate in
"sPecial Funct"
16
eXAMPle 1:
low lte interference.
Pass = no filter required
eXAMPle 2:
high lte interference.
Fail = 30db at ten suGGested
30 db)
navigate in "lte autotest" and press enter
____________________
__________________