Publicité
DESCRIPTION AND USE
The appliance you have purchased is a fan heater
for wall mounting equipped with a programmable
electronic daily/wekly timer-controller. The appliance
is ideal for use as a primary heat source for a room
when it would be too costly and impractical to start up
the central heating system. Forced ventilation is
always running, regardless of the selected power and
whatever the machine operating mode is set to
(fan/fan heater).
WARNING - CAUTION
!
Warning:
this symbol indicates precautions that must be taken to avoid injury
• Do not use this appliance for purposes other than
those specified in this booklet.
• After removing the appliance from its packaging,
ensure that it is complete and undamaged. If in
doubt contact a professionally qualified electrician
or VORTICE. Do not leave packaging within the
reach of children or infirm persons.
Certain fundamental rules must be observed when
using any electrical appliance, including: a) never
touch appliances with wet or damp hands; b) never
touch appliances while barefoot.
• Do not sit on the appliance or leave objects
standing on it (fig. 1).
• Do not use the appliance where flammable vapours
are present (alcohol, insecticides, fuels, etc. (fig. 2).
• If you decide to stop using the appliance
permanently, switch it off, disconnect it from the
power supply and store it out of the reach of
children and infirm persons.
• If the appliance is to be used in a bathroom, it must
be installed where its switches and controls are
inaccessible to persons in the bath or under the
shower (fig. 3).
* (or an authorised Service Centre if you live outside the UK or Ireland)
All Microrapid fan heaters are fitted with enclosed
heating elements. The unit is splash-proof. Plastic
body parts are made from self-extinguishing resin
(V0). The appliances also have thermal trip switches
to protect against overheating. The thermostat
incorporates an anti-frost function.
ENGLISH
7
Publicité
