Publicité
GARANT GridLine liquids cabinet, chemicals storage cabinet
de
NOTICE
Wiring and pipes in wall
bg
Damage to wiring and pipes.
»
Check wall for sufficient load-bearing capacity before drilling.
»
Use suitable drilling tools and materials.
da
»
Use suitable protective equipment.
»
Have trained personnel drill holes.
»
Do not drill holes close to wiring or pipes.
en
5.2.1.
Anchoring to the floor
C
fi
i
Applies to liquids and chemicals storage cabinet.
ü Wall plugs and screws chosen to match the nature of the floor.
fr
ü Floor has sufficient load-bearing capacity.
ü Adjusted levelling base.
1. Take lower storage shelf out of cabinet by lifting it at the holes on the sides.
it
CAUTION! Risk of cuts. Wear safety gloves.
2. Mark drilling spots through the holes in the cabinet floor and move the cabinet out of the way.
3. Drill the holes in the floor. Insert the plugs and bolt the cabinet to the floor.
hr
5.2.2.
Anchoring to the wall
D
lt
i
Only applies to chemicals storage cabinet.
ü Wall plugs and screws chosen to match wall.
nl
ü Wall has sufficient load-bearing capacity.
1. Mark drilling spots through the holes in the cabinet's rear and move cabinet out of the way.
2. Drill holes in wall, insert wall plugs and screw cabinet to wall.
no
6.
Assembly
pl
CAUTION
Assembly work
Risk of crushing feet or hands when assembling and when closing drawers.
pt
»
Wear foot protection and safety gloves.
»
Ensure safe footing on clean, level surface.
»
Do not assemble by yourself.
ro
6.1.
CHEMICALS STORAGE CABINET
6.1.1.
Containment tray
sv
i
Protective layer must not be damaged. In the event of damage, immediately remedy the fault or replace containment tray.
1. Insert 2 shelf strips per containment tray at an identical height in socket strip.
sk
2. Place the containment tray on shelf strips.
3. Secure the containment tray with locking clips.
7.
Maintenance
sl
Interval
es
Before the start of each shift
cs
Occasionally
hu
26
Action
Check for externally evident damage, defects and for good
condition. Check the edges and guides for signs of wear.
If defective, immediately block access and prevent use.
Have the damage repaired immediately.
Grease any locks and wheels with multi-function oil.
Publicité
