Publicité
Machine makes
ice, but at a
very slow rate.
Water is leaking
out of the unit.
PROBLEM POSSIBLE CAUSESSOLUTIONS
Cubes are
partially formed
and are white at
the bottom.
The condenser may be
dirty.
The air flow to the ice
machine may be
obstructed.
The ambient temperature
and water temperature
are high, or it is near with
some heat source.
A few water droplets are
on the door.
The water supply
connection is leaking.
Incorrect filter installation
There is not enough
water in the water bin.
Clean the condenser.
Check the installation to
ensure the air flow to the ice
maker is not blocked.
Check the installation to
ensure the ambient
temperature is in the proper
range.
Remove the ice storage bin
and clean the drain hole.
Under some conditions,
humidity may condense on
the door. Consider moving
the unit or just be more
careful when you open the
door.
Tighten water supply hose
fitting.
Check that the water filter is
installed correctly.
Check if the water supply
pressure is below 20 psi.
Check the water supply. It may
be restricted.
Check for a water leak at the
water trough.
- 27 -
Publicité
