Publicité
a standard three-prong grounding wall outlet to minimize the possibility of
electric shock hazard from the appliance. Have a qualified electrician
check the wall outlet and circuit to make sure the outlet is properly
grounded. It is your responsibility and obligation to have a standard
two-prong wall outlet replaced with a properly grounded three-prong wall
outlet.
Always plug the appliance into its own individual electrical outlet. The
voltage rating of the outlet must match the rating label on the appliance.
This match provides the best performance and prevents overloading the
electrical circuits, which could cause a fire hazard from overheated wires.
Never unplug your appliance by pulling on the power cord. Always grip the
plug firmly and pull straight out from the outlet. Repair or replace
immediately all power cords that have become frayed or damaged. Do not
use a cord that shows cracks or abrasion damage along its length or at
either end.
When moving the appliance, take care not to damage the power cord.
If the supply cord suffers damage, have the manufacturer, its service agent,
or similarly qualified persons replace the supply cord to avoid a hazard.
AVOIDING USE OF EXTENSION CORDS
Because of potential safety hazards under certain conditions, the
manufacturer strongly recommends that you do not use an extension
cord with this appliance.
LEVELING THE UNIT
CAUTION
The unit will be significantly heavier once it is operational and fully
loaded.
- 14 -
Publicité
