Publicité
1.Remove The Door
IMD50BI
Remove the hinge cover, use the flathead screwdriver to unscrew the top
hinge from the top of the unit, put it aside, then hold the door and lift to
remove the door from the bottom hinge.
IMD50BIO
Use the flathead screwdriver to unscrew the hinge pin from the top hinge,
put it aside, then hold the door and lift to remove the door from the bottom
hinge.
2.Swap The Hinge Locations
IMD50BI
Use the flathead screwdriver to unscrew the bottom hinge, and then install
it on the other side of the unit.
IMD50BIO
Use a Phillips screwdriver to unscrew the screws fixing the top and bottom
hinges to uninstall them both. Install the bottom right hinge to the left top of
the cabinet and the top right hinge to the left bottom of the cabinet. Cover
the right mounting holes by the plugs just disassembled from the left.
Note: unscrew the hinge pin from the left top hinge for later door
installation.
3.Re-Position The Handle.
Peel off the door gasket to get access to the mounting holes of door handle,
then unscrew the handle and install it to the other side of the door, recover
the door gasket after. Cover the right mounting holes by the plugs just
disassembled from the right.
4.Install The Door
IMD50BI
Align the bottom hinge hole to the bottom hinge pin, insert the door. Insert
- 17 -
Publicité
