f) Under abusive conditions, liquid may be
ejected from the battery(ies); avoid contact. If
contact accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery(ies) may cause irritation or
burns.
g) When battery packs are not in use, keep them
away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects that can make a connection from one
terminal to another. Shorting the battery terminals
together may cause burns or a fire.
6) Service
a) Have your lawnmower serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
lawnmower is maintained. Use of parts which do not
meet the original equipment specifications may lead
to improper performance and compromise safety.
b) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
2.3
SAFETY INSTRUCTIONS FOR
MAINTENANCE
•
To prevent accidental start during maintenance,
always turn off the product and remove the battery.
Wait for at least 5 seconds before starting any
maintenance work.
•
Follow the maintenance instructions correctly to
increase the product's lifetime and reduce the risk
of accidents. Professional repairs must be done by a
technician at an approved service center.
•
Only perform the maintenance tasks listed in the
operator's manual. Any other maintenance work
should be done by a technician.
•
Wear heavy-duty gloves when using the cutting
equipment to prevent injuries from the sharp blade.
•
Keep the cutting edges clean and sharp for optimal
and safe performance.
•
If you are experiencing difficulties with maintenance,
have a service technician conduct regular
inspections of the product and make any necessary
adjustments and repairs.
•
Replace any damaged, worn, or broken parts
immediately.
•
Follow the manufacturer's instructions when
changing accessories. Only use accessories
approved by the manufacturer.
•
When not in use, store the product, battery, and
battery charger in a dry, indoor, and locked area.
Keep the product, battery, and battery charger out of
the reach of children and unauthorized persons.
Save these instructions
English
3
INSTALLATION
Do not change or make accessories that are not
recommended by the manufacturer.
Do not put in the safety key or the battery pack until
you assemble all the parts.
3.1
UNPACK THE MACHINE
Make sure that you correctly assemble the machine
before use.
•
If the parts have damage, do not use the machine.
•
If you do not have all the parts, do not operate the
machine.
•
If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
3.2
UNFOLD THE LOWER HANDLE
Figure 2.
1. Pull and turn the handle knobs 90°.
2. Unfold the lower handle.
3. Line up the handle knobs in one of the three
positions on the brackets.
4. Turn the handle knobs 90° until they engage the
holes in the brackets.
Make sure that the two handle knobs are in the same
position.
Do not make damage to the cables when you fold or
unfold the handle.
3.3
INSTALL THE UPPER HANDLE
Figure 3.
7
WARNING
WARNING
WARNING
WARNING
NOTE
WARNING
EN