Publicité
D) FUNCTIONS WITH THE PTT SWITCH
1) PA (Public Address)
(PTT + AM/FM)
Press PTT key (12) and AM/FM key (4) to alternate between
mode.
PA
For details on operating in
46.
2) TALKBACK
(PTT + F)
This function allows you to hear your own modulation in the optional internal
or external speaker connected to the EXT.SP jack (E).
Press and hold the PTT switch (12) then press the F key (7) to
deactivate
the TALKBACK function.
When the function is active, "TB" displays.
3) TALKBACK LEVEL
(PTT +
s/t
This function allows to adjust the volume level of the TALKBACK.
1.
Activate the TALKBACK function.
2.
Press and hold the PTT switch (12) then use s/t key (9) on the unit to
increase / decrease the volume level of the TALKBACK (from 1 to 9).
3.
Release the PTT switch (12).
4) NOISE GATE
(PTT + EMG)
-
Press and hold the PTT switch (12).
-
Short press the EMG key (8) to activate (On) or deactivate (OF) the NOISE
GATE. "
" is displayed when the function is active.
E) MENU
The order of 17 menus is as described in this manual. However, the menu
displayed by entering the MENU will be the last menu modified by user.
The procedure is the same whatever the function is:
Press F key (7).
is displayed.
Long press
F key (7) to enter
the MENU.
1.
Use s/t key (9) on the unit or use UP/DN keys (13) on the microphone to
select
the menu to set.
2.
Press EMG key (8) to validate. The current color blinks on the display.
3.
Use s/t key (9) on the unit or use UP/DN keys (13) on the microphone to
modify the value of the parameter.
4.
New press on EMG key (8) to validate
stops blinking a) Return to the point 1to set another function or b) Press the
F key (7) to validate and exit the MENU.
CB
mode, consult the PA SETTING menu page
activate
)
the chosen value. The parameter
disappears from the display.
5.
If no key is pressed, the unit exits
from the display.
Note: UP/DN keys (13) on the microphone have the same effect as the
s/t key (9) on the unit. PTT switch (12) validates
PA
and
MENU.
disappears from the display.
1) COLOR
Press F key (7).
Long press
F key (7) to enter
1.
Use s/t key (9) on the unit or use UP/DN keys (13) on the microphone to
select
the
2.
EMG key (8) to validate.
Press
/
3.
Use s/t key (9) on the unit or use UP/DN keys (13) on the microphone to
modify the color of the display.
4.
Short press the
EMG key (8) to validate
point 1 to set another menu or b) Short press the
exit
the MENU.
5.
If no key is pressed, the unit exits
from the display.
Default COLOR is:
2) DIMMER
DIMMER function allows adjusting the brightness of the lighting or desabling
it (OF no backlight). 10 steps from 1 to 9.
Press F key (7).
F key (7) to enter
Long press
1.
Use s/t key (9) on the unit or use UP/DN keys (13) on the microphone to
select
the
2.
EMG key (8) to validate.
Press
3.
Use s/t key (9) on the unit or use the UP/DN keys (13) on the microphone
to change the value of the dimmer.
4.
Short press the EMG key (8) to validate. a) Return to the point 1 to set an-
other menu or b) Short press the
disappears from the display.
5.
If no key is pressed, the unit exits
from the display.
Dimmer default value is : 5.
43
MENU after 10 seconds.
the last setting and
is displayed.
the MENU.
menu.
The current color blinks on the display.
the chosen color. a) Return to the
F key (7) to validate
disappears from the display.
MENU after 10 seconds.
(orange).
is displayed.
the MENU.
menu.
The current value blinks on the display.
F key (7) to validate
MENU after 10 seconds.
disappears
exists
and
disappears
and
exit
the MENU.
disappears
Publicité
