Maintenance And Cleaning; Environmental Protection - Bosch GSB 12 VE-2 Instructions D'emploi

Masquer les pouces Voir aussi pour GSB 12 VE-2:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18

Maintenance and Cleaning

Before any work on the machine itself, re-
move the battery.
For safe and proper working, always keep
the machine and the ventilation slots clean.
Brush Replacement (see figure
When the brushes are worn the power tool
switches off automatically. For replacement of
the carbon brushes, loosen the screws and re-
move the cover lids 15. Insert a screwdriver or
similar into the notch of the brush holder 16 and
carefully pry it out. Remove the used carbon
brush and replace. The new carbon brush can
also be inserted when turned by 180°. Lightly
press down the new carbon brush until it clicks.
Afterwards mount the cover lids 15 again.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit order number
given on the nameplate of the machine.
16 • 2 609 932 156 • 03.04

Environmental Protection

)
F
Recycle raw materials instead of disposing as
waste
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for catego-
rized recycling.
Defective or worn out batteries must be recycled
according to the guidelines 91/157/EEC.
Batteries no longer suitable for use can be
directly returned at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
Service
Advice line
Fax
.............................................
English - 5
Nickel-cadmium-bat-
tery: If your product is
equipped with a nickel-
cadmium-battery, the bat-
tery must be collected, re-
cycled or disposed of in an
environmentally-friendly
way.
Nickel-metalhydrid-bat-
tery: If your product is
equipped with a nickel-
metalhydrid-battery,
battery can be disposed of
through the local waste
disposal system for solid
waste materials.
+44 (0) 18 95 / 83 87 82
............................
+44 (0) 18 95 / 83 87 91
....................
+44 (0) 18 95 / 83 87 89
the

Publicité

Table des Matières
loading

Table des Matières