Publicité
Setting the Appliance
This part provides instructions on how to set the appliance.
Operating instruction
1. Press the
ON/OFF button to switch on the appliance.
2. Press the
Function button to select a cooking mode. The display will show
the current setting.
3. Under Temp. and Fry mode, you can set the preferred heat level by touching
the
up and
down buttons.
4. After cooking, press the
The code "Hot" will show on the display if the hotplate is too hot to touch.
Cooking modes
ICON
NAME
Temp. mode
Fry mode
Boiling
Hot pot
Simmer
Keep warm
■ For milk heating, sauce cooking and others, we suggest using the
■ To quickly bring a pot of water to boil, use the
If the error code "Pot" appears on the cooking zone display
The cooktop has an automatic recognition system for suitable cookware. If no cookware suitable for
induction is detected on a cooking zone, this is indicated by the code "Pot" on the corresponding
cooking zone display.
■ The cookware used is not suitable for induction.
■ The cookware was not placed on the selected cooking zone.
■ The cookware was not placed in the middle of the cooking zone.
■ The cookware is too small.
To select cookware that is suitable for induction cooking, see section Induction Cooking.
www.iamzchef.com
ON/OFF button to switch off.
FUNCTION
Set the preferred temperature for cooking
Temperature range: 120°F ~ 465°F
Set the preferred heating level for cooking
Heating level range: P1 ~ P20
(From lowest to highest)
Enter the boiling mode with default setting
Default operation at 460°F for 18 minutes
Enter the hot pot mode with default setting
Default operation at 460°F for 2 hours
Enter the simmer mode with default setting
Default operation at 260°F for 2 hours
Enter the hot pot mode with default setting
Default operation at 140°F for 1 hours
Email: info@iamzchef.com Whatsapp:+1 (838) 910 8317
English
boiling mode.
6
Function
NOTE:
If you don't choose a
heat setting within 45
seconds, it will switch
off automatically.
temp. mode.
Facebook: amzchefappliance
Publicité
