Publicité
The glass is being
scratched.
Some pans make
cracking or clicking
noises.
The appliance makes
a low humming noise
when used in a high
heat setting.
Fan noise coming
from inside.
The appliance or a
cooking zone has
turned itself off
unexpectedly, a
tone sounds and an
error code is
displayed.
Pan do not become
hot and the error
code "Pot" appears
in the display.
www.iamzchef.com
Cookware with
rough-edge, unsuitable
abrasive scourer or
cleaning products is
used.
This may be caused by
the construction of your
cookware (layers of
different metals vibrating
differently).
This is caused by the
technology of induction
cooking.
A cooling fan built into
your appliance has
come on to prevent the
electronics from
overheating. It may
continue to run even
after you've turned it
off.
Technical fault.
(typically alternating with
one or two digits in the
display).
The pan is made of
unsuitable material,
wrong size, too small, or
not correctly centered
on the hotplate.
Email: info@iamzchef.com Whatsapp:+1 (838) 910 8317
English
Use pots and pans with even bases.Always
lift cookware off the surface instead of
sliding it.
Use cookware with flat and smooth bases.
See section Cleaning & Care.
This is normal for cookware and does not
indicate a fault.
This is normal, but the noise should
quieten down or disappear when you
decrease the heat setting.
This is normal and needs no action.Do
not switch the power off while
the fan is running.
Please note down the error letters and
numbers, switch it off, and contact a
qualified technician.
Center the pan. For additional information,
see section Induction Cooking.
9
Facebook: amzchefappliance
Publicité
