Publicité
Error Codes
If an abnormality comes up, the appliance will enter the protective state automatically and display
the corresponding protective codes:
Code
The material, size or position
of the pot does not meet the
Pot
heating requirements
Hot
The surface is too hot
Over-temperature
Furnace surface sensor
E1
open-circuit
Furnace surface sensor
short-circuit
IGBT sensor open-circuit
E2
IGBT sensor short-circuit
E3
The voltage is too low
E4
The voltage is too high
The above is the judgment and inspection of common failures.
Please do not attempt to disassemble the unit yourself to prevent any potential dangers or
damage to the appliance.
Technical Specification
Model
Supply Voltage
Installed Electric Power
Product Size
Weight and Dimensions may vary due to improvement.
We may change specifications and designs without prior notice.
MADE IN CHINA
Manufacturers: Zhongshan Hanlin Electrical Appliances Co., Ltd.
Add.: B Zone, No. 20, East Shangheng Street, Suicheng Village, Dongfeng Town, Zhongshan,
Guangdong 528425
Contact:
Tel:
Emily
www.iamzchef.com
Possible causes
HL-B5
110-120V~ 60Hz
1800W
280x350x45 mm
11.0x13.8x1.8 inch
+1 (838) 910 8317
Email: info@iamzchef.com Whatsapp:+1 (838) 910 8317
English
Measures
Place the correct pan.
Check section Induction Cooking for details.
Wait for cooling.
Wait for cooling and restart it later.
Restart the cooktop and try again.
If persists, contact after-sales service.
Restart the cooktop and try again.
If persists, contact after-sales service.
Restart the cooktop and try again.
If persists, contact after-sales service.
Restart the cooktop and try again.
If persists, contact after-sales service.
Check the voltage. If persists, contact
after-sales service.
Check the voltage. If persists, contact
after-sales service.
E-Mail:
info@iamzchef.com
10
Facebook: amzchefappliance
Publicité
