Disposal Of Your Old Appliance - Euroflex Monster SC35 PLUS Notice D'utilisation

extension tubes could be a hazard if the rack is situated at eye level.
1. Select your site for the wall rack. Check that there is room for the steam cleaner
in the position you choose and that it will not obstruct doorways or access to other
items stored near by. The cleaner drops down on to the rack so you will need to
site the wall rack with at least 6.5 cm clearance above it. Be certain that the
surface you are fixing to is sound an capable of bearing the weight .
2. Hold the wall rack in the correct position (ensuring that it is level
– we recommend you to use a spirit level), and using the rack as a template mark
the screw hole positions with a pencil.
3. Use the correct fixing for the surface you are fixing to according to the
manufacturers instructions. A wide range of fixings is available from your local
hardware store.
4. Screw the wall rack in place using round head or pan head screws of the
correct size for the fixing method you are using.

DISPOSAL OF YOUR OLD APPLIANCE

1. When this crossed-out bin symbol appears on a product it means that the product
is covered by European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the
municipal waste stream via specific collection facilities designated by the
government or the local authorities.
3. Proper disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact
your municipality, the waste disposal service or the shop where you purchased the
product.
FITTING THE WALL STORAGE RACK
PLEASE NOTE The tool caddy must be fitted to the Monster 60
SuperClean before the wall storage rack can be used.
IMPORTANT SAFETY MESSAGE When storing your Monster 60
SuperClean on the wall rack, ensure that any tools and accessories
in the tool caddy are not in a dangerous position. In particular the
13