Publicité
EN
WEEKLY TIMER SETTING OPERATION
1.Press Weekly timer Button to start weekly timer setting, and the display will
show"0".
Note: Other number means the weekly timer has been set.
2.Press Weekly timer Button a second time untl the back digits start flashing, the
display shows"1 d" that means the the weekly timer start from today.
1d= First day (Today)
2d = Second day (Tomorrow)
3d= Third day
4d = Fourth day
5d = Fifth day
6d = Sixth day
7 d = Seventh day
3.Press Weekly timer Button a third time to set the start working hours. Using the
[+] and [] to adjust. (0~23)
4.Press Weekly timer Button a fourth time to set power-off working hours. Using the
[+] and [H to adjust. (0~23)
5.Press Weekly timer Button a fifth time to set temperature. Using the [+] and [H] to
adjust. (17~27 or on/off)
6.Press Weekly timer Button a sixth time for next day, the display will show"2 d", the
operation method is same as above.
7.Repeat the above operation for each day!
If no press in 10 seconds during the time setting, it will automatically exit the 7-day
weekly timer setting.
OPEN WINDOW FUNCTION (ADDITIONAL HIDDEN FUNCTIONS)
In the thermostat control heating mode, when the ambient temperature drops over
3。C in 30 minutes, the display shows"00" and flashes, this means there is window
open or there may exist some cooling items opened, at the same time the
temperature control turns the heating off. You will need to turn the appliance off to
stop the flashes.
21
Publicité
