AIRFORCE INNOVA VISIO PLUS 90 Prescriptions De Montage Et Mode D'emploi page 33
MAINTENANCE
Maintenance Mode:
When maintenance mode is activated, the extraction flap will automatically open without turning
on the motor, allowing access to the extraction area and the compartments for the grease and
odor filters, so that cleaning and maintenance operations can be carried out.
Touch the extract button.
The extractor display lights up.
hold down 0 for two seconds
To exit maintenance mode, switch off the appliance by pressing the power button.
Cleaning
First use
•
Use a damp cloth to clean and dry the glass surface before using it for the first time.
•
It is recommended to dry the appliance after having cleaned it with a damp cloth, in order to prevent the
build-up of limescale.
Daily cleaning
•
Although food spills cannot burn into the glass, we nevertheless recommend you to clean the hob
immediately after use.
•
Best for daily cleaning is a damp cloth with a mild cleaning agent.
•
Dry with kitchen paper or a dry teacloth.
Stubborn stains
•
Stubborn stains can also be removed with a mild cleaning agent such as washing-up liquid.
•
Remove watermarks and lime scale with vinegar.
•
Metalmarks (caused by sliding pans) can be difficult to remove. Special agents are available.
•
Use a glass scraper to remove food spills. Melted plastic and sugar is also best removed with a glass scraper.
Never use abrasives. They leave scratches in which dirt and lime scale can accumulate. Never use
anything sharp such as steel wool or scourers.
FUNZIONAMENTO
OPERATION
33
33
2
sec
EN
I
