Paper Source Settings (Configuration source papier)
Elément
Tray1 (Bac 1)
Description
Paper Size (For‐
Spécifie le paramètre du format de papier chargé dans le
mat papier)
Bac 1.
Par défaut : A4
Equivalent dans le menu Configuration :
UTILITY (Utilitaire) - PAPER SETUP (Config. Pa-
pier) - TRAY1 PAPER (Papier Bac1)
Width (Largeur)
Spécifie la largeur du papier lorsque Paper Size (Format pa‐
pier) a la valeur Custom Size (Format personnalisé).
Plage : 92 à 216 mm
Equivalent dans le menu Configuration :
UTILITY (Utilitaire) - PAPER SETUP (Config. Pa-
pier) - TRAY1 PAPER (Papier Bac1)
Length (Lon‐
Spécifie la longueur du papier lorsque Paper Size (Format
gueur)
papier) a la valeur Custom Size (Format personnalisé).
Plage : 148 à 356 mm
Equivalent dans le menu Configuration :
UTILITY (Utilitaire) - PAPER SETUP (Config. Pa-
pier) - TRAY1 PAPER (Papier Bac1)
Paper Type (Type
Spécifie le paramètre du type de papier chargé dans le Bac 1.
de papier)
Choix : Plain Paper (Papier standard), Thick 1 (Epais 1), Thick 2
(Epais 2), Label (Etiquettes), Envelope (Enveloppe), Postcard
(Carte), Letterhead (Papier en-tête), Glossy 1 (Brillant 1), Glossy
2 (Brillant 2), Single Side Only (Recto seul), Special Paper (Pa‐
pier spécial)
Par défaut : Plain Paper (Papier standard)
Equivalent dans le menu Configuration :
UTILITY (Utilitaire) - PAPER SETUP (Config. Pa-
pier) - TRAY1 PAPER (Papier Bac1)
Epson AcuLaser CX37 Series
Utilisation de Web-Based EpsonNet Config
Guide de Référence
131