Ryobi BCS618 Manuel D'utilisation page 7

GB
FR DE ES
OPERATION
BLUE LED STATUS BUTTON
Charger has blue LED status button to indicate power on
BLUE LED STATUS BUTTON
100%
FULL BRIGHTNESS
0%
LED maintains full and constant brightness - batteries
are charging
100%
SLOW PULSE
0%
LED shows a slow pulse - batteries are in mainte-
nance mode.
100%
FLUCTUATING PULSE
0%
LED produces fl uctuating pulse – charger is in energy
save mode. Batteries are neither charging or being
maintained.
„ When batteries are charging , the blue LED status
button will maintain a full and constant brightness.
„ While batteries are in maintenance mode, the
blue LED status button will slowly pulse. When
maintenance mode is complete, charger goes into
enery save mode.
„ Blue status button will maintain a fluctuating pulse
while in energy save mode. When batteries are not
being charged, maintained or when the charger does
not hold any batteries.
NOTE: Battery port LEDs will turn off during maintenance
mode and energy save mode.
„ Charger awakens from energy save mode when
status button is pressed or automatically after 5 days
in energy save mode.
BATTERY PORT LEDS
„ Red LED on, Green LED off = Battery installed.
„ Red LED flashing, Green LED off = Battery is being
tested.
„ Red LED on, Green LED flashing = Battery is
charging.
„ Red LED off, Green LED on = Battery is fully
charged.
IT NL PT DK SE FI NO RU PL CZ
English
„ R e d L E D f l a s h i n g , G r e e n L E D f l a s h i n g ,
simultaneously = Battery is defective.
„ Red LED flashing, Green LED flashing, alternating =
Battery port is defective.
MAINTENANCE AND REPAIRS
Risk of injury
Service, testing and repairs should only be carried
out by authorised service centres.
We recommend our customer service department or
authorised service centres.
STORAGE
Store your charger in a cool dry place between 10 &
25°C. It is not recommended to leave it in a cold works
van overnight. Ensure no metal filings or swarf can fall
into the vents during storage, as this may cause serious
injury when it is next used.
ENVIRONMENTAL PROTECTION
SYMBOLS
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
SYMBOL
4
HU RO LV LT EE
Recycle raw materials instead of disposing
as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.
DESIGNATION
Recycle raw materials instead of disposing as
waste. The machine, accessories and packag-
ing should be sorted for environmental-friendly
recycling.
CE conformity.
Indoor use.
Instruction
Double-insulated construction
HR SI SK GR TR