Speedlink Snappy XL SL-6145-SBK Mode D'emploi page 7

What's Included
• Snappy XL Mouse
• PS/2 adapter
• User manual
System requirements
• Windows 2000/XP/Vista
• USB or PS/2 port
Connecting via USB
Switch your computer on and
wait until your operating system
has fully loaded. Plug the mouse
into any free USB port. Windows
will automatically detect that
new hardware has been con-
nected.
The Snappy XL Mouse will work
on any of the specified operating
systems without a driver. You
can start using it straight away.
Connecting via PS/2
Switch your computer off. Plug
the supplied PS/2 adapter onto
the mouse's USB connecter.
Now plug the mouse into the
computer via the PS/2 port
for the mouse. Switch your
computer on and wait until your
operating system has fully loa-
ded. Windows will automatically
detect that new hardware has
been connected.
The Snappy XL Mouse will work
on any of the specified operating
systems without a driver. You
can start using it straight away.
Settings for left-handed use
If you want to use the mouse
left-handed then you should
swap the functions of the right
and left mouse buttons. To do
that, proceed as follows:
• Open Windows Control Panel
• Double click on the "Mouse"
icon
• Under the tab "Buttons" check
the box "Swap the left and
right buttons on the external
pointing device"
• Click on "Apply" then "OK"
The functions of the mouse but-
tons are now set for left-handed
use.