Publicité
OPERATING THE BRAKES
1.
To stop, gently apply a gripping pressure to both brakes simultaneously (fig.5),
this will slow down and stop your tri-walker.
2.
The brakes on your tri-walker have a park option (fig.5a). To operate the park
option, push downwards on both brakes simultaneously. You will feel the brake
make a very slight click. Your brakes are now in the 'lock' position.
3.
To unlock, simply pull up the brake again, you will hear a slight click as the 'park'
disengages.
Fig. 5
FITTING THE CARRY BAG
1.
The Tri-walker bag should be fitted when the walker is set in the open position.
2.
Take the strap situated upon the upper side of the tri-walker bag, and wrap this
around the diagonal bar of the frame (fig. 6) and push the stud fasteners
together. Repeat on the opposite side.
3.
Take the strap on the side of the tri-walker bag and wrap this around the vertical
bar of the frame (fig. 6a) and again push the stud fasteners together.
Fixing and Maintenance Instructions
Fig. 5a
Fig. 6
Fig. 6a
4
Fig. 5b
Ver.3 03/2013 (1326)
Publicité
