Publicité
S
A
M
ENS
IR
ANUAL
Cleaning display
Timer
3.4
Preferences
Preferences
Set language
Set date and time
Manual version 1.0- North America (13-09-2016)
The use of the touch screen can leave marks or fingerprints on
the screen. The screen can be cleaned using a damp, soft cloth.
Use this function to disable the touch screen for 20 seconds in
order to be able to clean it.
The b-touch control panel has a week timer. You can set two
start and stop times for every day of the week. The unit is on
between the start time and the stop time. The second start
and stop times are optional. When the ON/OFF button is dis-
played on the screen, the unit can also be switched ON or
OFF manually. From the next switching moment, the unit fol-
lows the timer again. When the timer is switched on, the sym-
bol
is displayed on the Home screen.
@
The menu
Preferences
allows you to make settings for the use
of the control panel.
The control panel offers a choice of languages. Choose your
preferred language from the list.
The date and time are necessary for the timer function, the
lifespan of the filter and for tracking usage statistics of the unit.
Caution:
c
The date is also required in situations where the IR
sensor is not suitable for measuring the outdoor
temperature and no outdoor temperature sensor
has been connected. In that case, the CHIPS control
estimates the outdoor temperature based on the
month of the year and the climate data for your
country. An incorrect date causes the unit to work
less optimally.
The automatic summer time function switches the clock to
summer or winter time in accordance with the applicable
European rules. If you do not use this function, you can switch
to summer time manually. The clock is then set one hour for-
ward.
en
O
PERATION
en-53
Publicité
