Ducane Affinity 3400 Guide De L'utilisateur page 32

Masquer les pouces Voir aussi pour Affinity 3400:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ANNUAL MAINTENANCE
ANNUAL MAINTENANCE
REPLACING THE MAIN BURNERS
1)
Your Ducane
®
gas barbecue must be "OFF" and cool.
2)
Turn "OFF" gas at source.
3)
Remove the cooking grate and the heat distribution plates, exposing the burner
tubes.
4)
Remove front panel knobs, bezels and igniter Module for electronic ignition for the
burners.
5)
Then remove the front panel.
See: Inspection of the Spider/Insect Screens for removal of the burner tube.
To reassemble, reverse steps 3 through 5 above.
CAUTION: The burner openings (1) must be positioned
properly over the valve orifices (2). Check proper assembly
before fastening manifold/front panel in place.
WARNING: After reinstalling the gas lines, they should be
leak checked with a soap and water solution before using
the barbecue.
1
2
BATTERY REPLACEMENT OF BURNER IGNITER
Unscrew the push button igniter and remove the old battery and replace with a new one.
Requires 1 "AA" alkaline battery. The shrink wrap must be removed from the battery
before installation.
ATTENTION: This product has been safety tested and is only certified for use in a specific country. Refer to country
designation located on outer carton.
These parts may be gas carrying or gas burning components. Please contact a Ducane Customer Service Representative in your area for genuine Ducane
replacement part(s) information by calling 1-800-382-2637.
WARNING: Do not attempt to make any repair to gas carrying or gas burning components without contacting Ducane. Your
actions, if you fail to follow this product Warning, may cause a fire or an explosion resulting in serious personal injury or
death and damage to property.
32
2
1
www.ducane.com

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Affinity 440027010341

Table des Matières