Door Reversing - Far Rtg925Eb G Manuel D'instructions

ENGLISH
To prevent the refrigerator from
tipping over during use, do the
following before use!

• Door reversing

Users can change the direction of opening according
to one's own needs. The concrete operating sequence
is as follows :
1. Remove the hole
cover.
GB-12
30cm
1. Take the parts out of the instruction bag.
2. Use a Phillips screwdriver to install the
anti-tipping foot in the positions shown in
the illustration. Installed at the other end of
the refrigerator door hinge, at the far end of
the refrigerator door.
2.Remove hinge cover and top
hinge with a "+" screwdriver, then
remove the door.
30cm
50-75mm